Hurley H20 Davit | Inflatable Dinghy Davits | Boat Davit Lift Mount System

Exclusive Partner of

and used by other major manufacturers

Click picture for a close up view

"H₂0"

Hurleys' ₂nd Option

Hurley Marine, Inc. pioneered the original swim platform davit of this style back in 2000. Since the original, our research and development (R&D) team have worked to provide the consumer with the very best in design and quality for versatility and years of enjoyment.

We believe that you should enjoy taking your tender along but not sacrificing your vessel's performance. The low profile storage position on our davits provide exceptional stern visibility with none of the performance-robbing kite flying drag.

This rugged davit system lets you lift and pull your dinghy on for easy storage or just push off for launching. Easily mounted on the swim platform and can be installed while the vessel is in the water.

There are no other dinghy davits that compare!. Make Sure it says "HURLEY" . . . Sold Worldwide!

Featured in the Product Showcase of the 2012 Miami International Boat Show . . .

With the Sleek Euro Design, Marine Grade High Density Polyethylene Cradles and 316 Stainless Steel Components the Hurley H₂0Functions as Good as it Looks and is Impervious to Harsh Environments.

Our revolutionary new stainless steel mounting system provides a quick release, leaving a very small footprint profile that could pull a barge.

Each mount footprint requires only two bolts for the install and only stands 5/8" high leaving a clear deck for any activity.

• Multiple Position Adjusting Chock System, adjusts to hull configuration
• Can Be Used for Soft or Rigid Tenders
• Adjustable Cradle Angles for Easy Deployment & Retrieval
• Independent Cradles with Rollers
• Each Roller Well has a Weap Hole for Water to Drain
• Multiple Mount Sizes to Accommodate Different Size Platforms
• Can Be Used on Hydraulic Swim Platforms with Existing Channels to Remove Those Ugly and Dangerous Chocks

Easily mounted on the swim platform, this hassle free system lets you lift and pull your dinghy on for easy storage or just push off for launching. Always available in an emergency.

The difficultly of retrieval depends upon the weight of your dinghy and the height of your platform off the water.

If you have a lip on the outer edge of your platform, let us know how high it is and we will ship you free shims with your purchase.

patent pending

At this time the H₂0 only offers 6", 8" and 10" mounts.
Our 36" mounting system
(for smaller platforms) will be available later this year.

Click Here to select the proper mounting size for you or see below.

Parts & Accessories Below

HURLEY H₂0 DAVIT
1289.95

MSRP $~~1389.95~~
choose correct mount size

Look below to select the proper mounting size for you.

We Welcome
International Sales!

Product Registration

Recommended Tie-Down Method

On-line Davit Work Sheet

H₂0 Davit Instructions

~ Mount Sizing Chart ~

To determine which mount system will work best for you, measure the beam of your dinghy, divide by 2 and add 4 inches. Now measure your platform (transom to the end). You must add a number below to your platform length figure in order to determine which mount to use.

• 0 - 2" for the 6" Mount
• 2"-4" for the 8" Xtensions
• 4"-6" for the 10" Xtensions

Example: If your dinghy width is 60" then divide by 2 + 4" = 34". Swim platform is 32". By adding 2" to the platform this would make it equal to the dinghy width of 34" so then you would have chosen the 6" model.

Hint: 4 inches of the deck mount must be used to secure to the platform.

If you have a lip on the outer edge of your platform, let us know how high it is and we will ship you free shims with your purchase.

On-line Davit Work Sheet

If your having problems determining the right mount,
give us a hail at
1.906. 553.6249

or fillout our on-line Davit Work Form.

Do you need Straps and Padeyes to secure your dinghy to the platform? See below!

^™