HURLEY DINGHY DAVIT
$889.95
choose correct mount size
Look below to select the proper mounting size for you.
Strap Mount systems are hinged
off of a hand rail as some
Cruiser Yachts have.
Over-night Shipping Available.
Accessories & Parts below!
|
|
 INSERT FOR RIB
$59.95
add this button to
your shopping cart for ribs.
Customize your Hurley Davit
to fit your hard bottom.
We will send your davit fitted with polyethylene inserts that is easily scribed and then cut for an exact fit for your hard bottom rib boat. Fast & Easy!
To add a Rib Insert for your older davit click here!
|
|
HURLEY DINGHY DAVIT
for smaller platforms
$989.95
complete w/36" Mounts
The 36" mounts are for smaller platforms and lighter loads. Contact us for details. See sizing chart below. Mounting system has a Quick Release for removal from platform.
Out of Country Shipping Available.
|
|
|
~ Mount Sizing Chart ~ |
|
|
To determine which mount system will work best for you, measure the beam of your dinghy, divide by 2 and add 4 inches. Now measure your platform (transom to the end). You must add a number below to your platform length figure in order to determine which mount to use.
• 0 - 2" for the 6" Mount
• 2"-4" for the 8" Xtensions
• 4"-6" for the 10" Xtensions
• 6"+ for the 36" Xtensions
|
|
Example: If your dinghy width is 60" then divide by 2 + 4" = 34". Swim platform is 32". By adding 2" to the platform this would make it equal to the dinghy width of 34" so then you would have chosen the 6" model.
Hint: 4 inches of the deck mount must be used to secure to the platform.
If your having problems determining the right mount, give us a hail at
1.906. 553.6249
|
|
If your having problems determining the right mount,
give us a hail at
1.906. 553.6249
Do you need Straps and Padeyes to secure your dinghy to the platform? See below!
 ™ |
|
|
|
|
|
|
|
|
~ Accessories ~
|
|
|
Tie Down Folding Padeye
Stainless - each
$38.95
|
|
|
Tie Downs
colors may vary - pair
Cambuckle $19.95
Ratchet $29.95
|
|
Protective Mount Caps
pair
$7.95
|
|
|
|
|
|
Pin Lanyards - 6"
pair
$14.95
|
|
Stainless Weaver Adapters
To be used with the sliding Weavers Snap Davit Mounts. Hardware inluded.
$75.00
|
|
Stainless Toggles - 4
To fasten mounts where the other side is inaccessible.
$33.95
|
|
|
|
|
|
14g Stainless Backing Plates
used w/ 6", 8" or 10" mounts
2" x 4" - pair
$24.95
|
|
Hurley Marine Ball Cap
Sportsman Heavy Duty Brushed Twill Sandwich Cap.
$24.95
|
|
|
|
|
~ Replacement Parts ~
|
|
|
|
|
|
36" Mounts - pair
$135.00
|
|
Strap Mount
each
$9.99
|
Rubber Foot
Replacement - each
$7.95
|
|
|
Stainless Pivot Pin
Replacement - each
$9.95
|
|
End Cap
Replacement - pair
$7.95
|
 |
|
Thanks for your order!
We Ship . . .
|
|
|
Davit Instructions
Frequently Asked Questions
Return Policy / Warranty
Press Release
Dealer Application
Hurley Trim Tab Lights
Product Registration |
|
|
|
|
|
